Skip to content
G-MAN

Main Navigation

  • G PHOTO PORTFOLIO
  • Previous G-man pages

Category: 3D

StarGate Coaster 9-18-21

September 18, 2021 (October 20, 2021) betoman

I’ve been a fan of the StarGate movie and series for a while now and since I had made some Koozies last year – I decided to make myself a coaster. But in the shape of the famous StarGate. I found this cool 3D template online so I printed it […]

3D, Creativity, DIY Leave a comment

Robocop A9 Pistol 3D Print

September 14, 2021 (September 14, 2021) betoman

Robocop (1987 version) is one of my favorite movies. I was in awe with the costume and the A9 pistol. Recently I found the 3D template online so I downloaded it and printed it. It took a while to print the components, assemble and sand then glue together – but […]

3D, DIY, Movies Leave a comment

Tiny TV build Aug 2021

August 29, 2021 (October 19, 2021) betoman

Had a lot of fun building this project given to me by Jim. I got the kit back on my Birthday (April) but just hadn’t gotten around to building it. I had to paint it (get reference images), then assemble it (along with the electronics) and then load up some […]

3D, Creativity, DIY, TV Leave a comment

3D Print latch June 2021

June 26, 2021 (June 26, 2021) betoman

Bought a used Rubbermaid shed a while back and when we assembled it (after our other shed was built) we noticed the Lock Hasp (or latch on door) just didn’t stick long enough since the floor was a little warped. So I found a model online, stretched it up about […]

3D, DIY Leave a comment

Ambitious 3D upgrade to my Ender 3 Pro

June 5, 2021 (September 1, 2021) betoman

I’ve always had issues trying to print multiple items on my Ender 3 Pro, I’d fill up the bed with multiple parts and inevitably one would fail and then break off and ruin other parts.  I decided to upgrade my print bed to a metal one in the hopes prints […]

3D, DIY Leave a comment

3D Sony HDMI Clamp – REWORK

September 10, 2020 (September 10, 2020) betoman

  Remember the issue I was having with my Sony HDMI port? The connection on the camera was getting loose from years of use and in order to save some money (and time) to repair the port – I 3D printed a clamp.  But I did notice that in day […]

3D, Creativity, DIY, Sony A6000, Technology Leave a comment

Upgraded my Ender 3 Pro’s circuit board 9-5-20

September 5, 2020 (September 5, 2020) betoman

Replaced the 16bit circuit board to a new 32bit board on my Ender 3 Pro 3D printer. Nothing wrong with the current board but upgrading (small cost) included these benefits: Quieter stepper motors (not as much noise when printing) Enable thermal runaway (printer shuts down if the heating sensor malfunctions […]

3D, DIY Leave a comment

Sony Periscope 3D build 5-23-20

May 24, 2020 (May 24, 2020) betoman

Worked on another “Practical 3D” build. My current camera does not allow for the back screen to flip up and over for me to properly frame myself when filming myself. Thinking of a periscope – I found these objects online and viola. I could buy one of these online (approx […]

3D, Creativity, DIY, Sony A6000, Technology, Video Leave a comment

Lego Superman flies 5-8-20

May 8, 2020 (December 3, 2020) betoman

Give the video a minute to load. I had seen how some folks had strapped an action figure (Superman) just in front of the Drone’s camera. This gave the illusion that Superman figure was flying. So I wanted to try this on a smaller scale.  Using a Lego Superman I […]

3D, Action Figure Photography, Creativity, Drone Leave a comment

Posts navigation

  • 1
  • 2
  • 3
  • 4
  • ❯

Categories

Recent Posts

  • 1968 Firebird Hot Wheels Customization – Dec 2021
  • StarGate Coaster 9-18-21
  • Robocop A9 Pistol 3D Print
  • Tiny TV build Aug 2021
  • 3D Print latch June 2021

Archives

Meta

  • Log in
  • Entries feed
  • Comments feed
  • WordPress.org
Copyright ©2022 G-MAN : . Theme: Simple Dark by IndoCreativeMedia.